Pressure sensor SPAN-P10R-G18M-PNLK-PNVBA-L1

63$

In stock

Consultation

Name	Position sensor
Product series	SPAN
Switching output	PNP
Symbol	995685
Resolution	RCM mark c UL us - Listed (OL)
CE marking (see declaration of conformity)	In accordance with EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)	In accordance with UK EMC regulations In accordance with UK RoHS regulations
Certification body	UL E322346
Material information	RoHS compliant
Measured variable	Relative pressure
Measurement method	Piezoresistive pressure sensor
Pressure measuring range - initial value	0 MPa
Initial value of pressure measuring range	0 psi
Final value of pressure measuring range	1 MPa
Overload pressure	1.5 MPa
Gauge pressure	15 bar
Operating medium	Compressed air according to ISO 8573-1:2010 [7:4:4] Inert gases
Note regarding operating/pilot medium	Operation with lubricated air possible
Medium temperature	0 °C ... 50 °C
Ambient temperature	0 °C ... 50 °C
Accuracy in ±% FS	1.5 %FS
Repeatability in ± %FS	0.3 %FS
Temperature coefficient in ± %FS/K	0.05 %FS/K
Analog output	0 – 10 V 4-20 mA 1 – 5 V
Minimum load resistance, output voltage	20 kΩ
Short-circuit protection	Yes
DC operating voltage range	15 V…30 V
Reverse polarity protection	For all electrical connections
Mounting type	Front panel mounting with thread> wall/surface bracket
Mounting position	Any
Pneumatic connection	Male thread G1/8 Female thread M5
Product weight	46 g
Housing material	PA-reinforced
Degree of protection	IP40
Corrosion resistance class (CRC)	2 – moderate corrosion stress
LABS conformity	VDMA24364-B1/B2-L
Suitability for Li-ion battery production	Metals with a mass fraction of copper, zinc or nickel above 1% are excluded. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical connectors and coils.
Cleanroom class	Class 4 according to ISO 14644-1
Maximum overload pressure	15 bar
Electrical connection 1, connection type	Connector
Electrical connection 1, connection technology	Wiring diagram L1J
Electrical connection 1, number of contacts/cores	4
Electrical connection 1, connection diagram	995428
Materials in contact with medium	FPM High-alloy stainless steel
Switching function	Window comparator Threshold comparator Automatic difference monitoring
Switching element function	NC/NO (normally closed/normally open contact, switchable)
Maximum output current	100 mA
Protocol	IO-Link
IO-Link, protocol version	Device V 1.1
IO-Link, profile	Smart Sensor Profile
IO-Link, functional classes	Binary data channel (BDC) Process data variable (PDV) ID Diagnostics Teach channel
IO-Link, communication mode	COM2 (38,4 kBaud)
IO-Link, SIO mode support	Yes
IO-Link, port class	A
IO-Link, process data width OUT	0 bytes
IO-Link, process data width IN	2 bytes
IO-Link, process data content IN	14 bit PDV (pressure measurement value) 2 bit BDC (pressure monitoring)
IO-Link, minimum cycle time	3 ms
IO-Link, data storage required	500 bytes
Display type	Backlit LCD
Display units	MPa bar inH2O inHg kPa kgf/cm² mbar mmHg psi
Setting parameters	IO-Link Teach-In using display and buttons
Manipulation protection	IO-Link PIN code
Threshold setting range	0%...100%
Hysteresis setting range	0%...90%
Maximum current load resistance	500 Ω
Connection	Male 1/8", female thread M5
Indication	Display
Operating pressure range	0..10 bar
Electrical connection	Cable connector

Share on social media

	Quantity	Price

Total 0$ Place order

Pressure sensor SPAN-P10R-G18M-PNLK-PNVBA-L1

Оставить заявку на подбор оборудования