|
Quantity
|
Price
|
||
|
|
|||
|
|
|||
WECON LX5V BD boards for PLC I/O and communications
WECON LX5V BD expansion boards fit a compatible controller slot and add the channels or interfaces a system needs. This category includes boards for digital and analog inputs and outputs, temperature measurement, RS485 and Ethernet. They let you add a function without a separate external module for each requirement.
Choose a board by function
- Digital signals: LX5V-8BX-BD adds eight inputs, while LX5V-8BYT-BD adds eight transistor outputs.
- Analog signals: choose current or voltage input and output boards, including combined versions. Match the channel count and signal range to your equipment.
- Temperature: boards are available for PT100 sensors and thermocouples. Match the board's input type to the sensor.
- Serial communication: LX5V-2RS485-BD adds RS485 interfaces for compatible devices.
- Ethernet: LX5V-ETH-BD adds network connectivity. Check its supported protocol and the controller version before ordering.
Check compatibility
Confirm the PLC's exact part number, firmware version, available BD slots and programming software version. For analog boards, check the signal type, range and parameter configuration requirements. For communications boards, check the protocol, ports and network layout. WECON documentation allows LX5V BD boards to be used with certain LX3 PLCs, but verify the particular PLC, board and firmware combination.
Related categories
Find a base controller among compact WECON PLCs. Explore other boards under LX3V BD modules, or see LX3V expansion modules for external expansion. Browse the full WECON PLC and module range.
Need help selecting a board?
Send us the PLC part number and the required signals or communication protocol. An engineer can help select an LX5V BD board and check compatibility.
Request a selectionFAQ: WECON LX5V BD boards
What does an LX5V BD board add?
Depending on the model, it adds digital or analog channels, temperature sensor inputs or a communications interface.
Can an LX5V BD board be installed in an LX3 PLC?
WECON provides for this with compatible controllers. Check the exact PLC model, board and firmware version before ordering.
How many BD boards can a controller use?
That depends on the base PLC model and its I/O count. Check the available slots for the exact part number.
Does LX5V-ETH-BD support every network protocol?
No. WECON documentation specifies Modbus TCP for this board. Check controller compatibility as well.
What information is needed to select an analog board?
Provide the PLC model, required input or output count, signal type (current or voltage), operating range and channel configuration needs.