Pressure sensor SPAE-P10R-S6-PNLK-2.5K

62$

In stock

Consultation

Name	Position sensor
Product series	SPAE
Switching output	NPN
Symbol	995430
Resolution	RCM mark c UL us - Recognized (OL)
CE marking (see declaration of conformity)	In accordance with EU EMC Directive In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)	In accordance with UK EMC regulations In accordance with UK RoHS regulations
Certification body	UL E322346
Material information	RoHS compliant
Measured variable	Relative pressure
Measurement method	Piezoresistive pressure sensor with display
Pressure measuring range - initial value	0 MPa
Initial value of pressure measuring range	0 psi
Final value of pressure measuring range	1 MPa
Overload pressure	1.5 MPa
Gauge pressure	15 bar
Operating medium	Compressed air according to ISO 8573-1:2010 [7:4:4]
Note regarding operating/pilot medium	Operation with lubricated air possible
Medium temperature	0 °C ... 50 °C
Ambient temperature	0 °C ... 50 °C
Accuracy in ±% FS	1.5 %FS
Repeatability in ± %FS	0.3 %FS
Temperature coefficient in ± %FS/K	0.05 %FS/K
Short-circuit protection	Yes
DC operating voltage range	18 V ... 30 V
Reverse polarity protection	For all electrical connections
Electrical connection	3-core cable Open end
Cable length	2.5 m
Mounting type	Plug-in
Mounting position	Any
Pneumatic connection	QS-6 connector
Product weight	40 g
Housing material	PA-reinforced
Seal ring material	FPM
Degree of protection	IP40
Corrosion resistance class (CRC)	2 – moderate corrosion stress
LABS conformity	VDMA24364-B2-L
Suitability for Li-ion battery production	Metals with a mass fraction of copper, zinc or nickel above 1% are excluded. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical connectors and coils.
Cleanroom class	Class 4 according to ISO 14644-1
ADC resolution	10 bit
Switching function	Free programming
Switching element function	Normally closed contact N/O contact switchable
Switch-on time	1 ms
Maximum output current	100 mA
Display range - initial value	0 %FS
Display of final range value	99 %FS
Protocol	IO-Link
IO-Link, protocol version	Device V 1.1
IO-Link, profile	Smart Sensor Profile
IO-Link, functional classes	Binary data channel (BDC) Process data variable (PDV) ID Diagnostics Teach channel
IO-Link, communication mode	COM2 (38,4 kBaud)
IO-Link, SIO mode support	Yes
IO-Link, port class	A
IO-Link, process data width OUT	0 bytes
IO-Link, process data width IN	2 bytes
IO-Link, process data content IN	14 bit PDV (pressure measurement value) 2 bit BDC (pressure monitoring)
IO-Link, minimum cycle time	3 ms
IO-Link, data storage required	500 bytes
Display type	LED display 2-digit number
Display units	%FS
Switching status indication	Yellow LED
Setting parameters	IO-Link Teach-In using display and buttons
Manipulation protection	PIN code
Threshold setting range	1%...98%
Connection	QS-6 connector
Indication	LED display 2-digit number
Operating pressure range	0..10 bar
Electrical connection	2.5 m cable
Switch-off time	1 ms

Share on social media

	Quantity	Price

Total 0$ Place order

Pressure sensor SPAE-P10R-S6-PNLK-2.5K

Оставить заявку на подбор оборудования