|
Quantity
|
Price
|
||
|
|
|||
|
|
|||
Solutions by application
Need help choosing a kit?
Tell us about the travel, load, speed, mechanics and control method. An engineer will help you select a FESTO ST stepper motor kit for your axis.
FESTO ST stepper motor kits for positioning
A FESTO ST kit pairs a stepper motor with a compatible CMMT-ST drive. These combinations are used for controlled axis movement, feeding, dosing and mechanism positioning. The listed kits operate in 24–48 V DC systems; select a configuration according to the load, speed and control architecture.
How to select a kit for your mechanism
- Torque at operating speed: allow for the load, friction, acceleration and peak conditions. Consider the motor’s performance at the required speed as well as its holding torque.
- Type of motion: determine the travel, gear ratio, screw lead or belt transmission parameters, inertia and cycle rate.
- Power supply: check that the supply meets the requirements of the specific drive and its chosen 24 V or 48 V DC operating conditions.
- PLC integration: match the required network protocol to the CMMT-ST version and your controller.
- Connections: check the product page for the kit contents, cable length, connectors, feedback and mounting accessories.
Typical applications
- Linear axis movement in a feeding or assembly mechanism.
- Dosing and indexing with a repeatable motion cycle.
- Equipment retrofit with the drive integrated into an existing control system.
Related sections
Explore stepper motors, motor controllers, power supplies and cables. For the mechanical assembly, see electromechanics. Other matched combinations are available under drive kits. For selection assistance, visit contacts.
FESTO ST stepper motor kit FAQ
What is included in a stepper motor kit?
The core components are a stepper motor and a compatible drive. Check the specific product page for cables, cable length and other included parts.
What does 300 W in the kit name mean?
It identifies the drive’s power class, not the rated power of every motor in this category. Check the motor’s own torque, speed and power specifications when selecting a kit.
Does the system need a 24 V or 48 V supply?
The drive uses a DC supply. Select the voltage and power supply according to the specific configuration and required motion performance.
Can the kit be integrated with a PLC?
Yes, if the chosen drive version supports the required protocol and your PLC can control it. Check the full CMMT-ST part number and network configuration before ordering.
How can I reduce the risk of missed steps?
Size the motor for the required torque at operating speed, set suitable acceleration and configure the drive. If encoder feedback is used, check its wiring and settings.