Controller CPX-E-CEC-M1 (EtherCAT, 24 V DC, IP20, 24 V)

795$

In stock

Consultation

Dimensions W x L x H	42.2 mm × 76.5 mm × 125.8 mm
Width	18.9 mm
Mounting type	With DIN rail
Product weight	145 g
Mounting position	Preferably vertical; horizontal
Ambient temperature	-5 °C ... 50 °C
Note on ambient temperature	-5 ... 60 °C for vertical mounting
Storage temperature	-20 °C ... 70 °C
Relative humidity	95%; non-condensing
Degree of protection	IP20
Corrosion resistance class (CRC)	0 — no corrosive exposure
Vibration resistance	Transport vibration test at severity level 1 according to FN 942017-4 and EN 60068-2-6
Shock resistance	Shock test at severity level 1 according to FN 942017-5 and EN 60068-2-27
Protection against direct and indirect contact	PELV
LABS conformity	VDMA 24364, zone III
CE marking (see declaration of conformity)	According to the EU EMC Directive According to the EU RoHS Directive
UKCA marking (see declaration of conformity)	According to UK EMC regulations according to UK RoHS regulations
KC marking	KC-EMV
Resolution	RCM mark c UL us — Listed (OL)
Certification body	UL E239998
Material information	RoHS compliant
Housing material	PA
Diagnostics via LED	Power mode; module status; network status, engineering port 1; EtherCAT network status; Run; power supply; electronics/sensors; load power supply; system error
Maximum address space, outputs	64 bytes
Module parameters	Channel alarm grouping; undervoltage diagnostics; channel undervoltage alarm; representation of process values for analogue modules
Power supply, connection type	Terminal strip
Power supply, connection technology	Spring-loaded terminal
Power supply, connection diagram	995847
Supply voltage, number of poles/wires	4
Power supply, conductor cross-section	0.2 mm² ... 1.5 mm²
Power supply, note on conductor cross-section	0.2–2.5 mm² for flexible conductors without ferrules
Reverse polarity protection	Reverse polarity protection of sensor supply: 24 V against 0 V
Maximum address space, inputs	64 bytes
Rated DC operating voltage, electronics/sensors	24 V
Permissible voltage fluctuations, electronics/sensors	± 25%
Current consumption at rated operating voltage for electronics/sensors	Nominally 65 mA
Mains fault ride-through	20 ms
Maximum number of modules	10
Control elements	RUN/STOP DIP switch
IP address setting	DHCP via CODESYS
Fieldbus interface, type	Ethernet
Fieldbus interface, protocol	EtherCAT; CoE; EoE; FoE; EtherCAT Master
Fieldbus interface, function	Bus connection continuation
Fieldbus interface, connection type	Socket
Fieldbus interface, connection technology	RJ45
Fieldbus interface, connection diagram	995789
Fieldbus interface, number of contacts/wires	8
Fieldbus interface, galvanic isolation	Yes
Fieldbus interface, data transmission rate	100 Mbps
Ethernet interface, connection type	Socket
Ethernet interface, protocol	EasyIP; Modbus TCP; OPC UA; TCP/IP
Ethernet interface, function	Diagnostics
Ethernet interface, connection technology	RJ45
Ethernet interface, connection diagram	995789
Ethernet interface, number of contacts/wires	8
Ethernet interface, data transmission rate	10 Mbps; 100 Mbps
System parameters	Diagnostic memory; fail-safe response; system startup
Configuration support	CODESYS V3
Additional functions	CODESYS V3 with SoftMotion
CPU data	128 MB RAM; dual-core 650 MHz processor
Electrical power supply, function	Electronics and sensors
Power supply, connection type information	For > 4 A and UL: 2 terminal connections for power supply
Maximum power supply	8 A
Software	CODESYS provided by Festo
Program memory	12 MB for user program
Processing time	Approx. 200 µs per 1k instructions
Function blocks	And others; read CPX-E module diagnostics; CPX-E diagnostic status; copy CPX-E diagnostic trace
Backup time, real-time clock	3 weeks
Marker	120 kB retained data; CODESYS variable concept

Share on social media

	Quantity	Price

Total 0$ Place order

Controller CPX-E-CEC-M1 (EtherCAT, 24 V DC, IP20, 24 V)

Оставить заявку на подбор оборудования